General information only, not tax advice. NeatSum is software, not a registered tax or BAS agent. Record-keeping rules checked against the ATO's pages on 15 November 2026.
On this page
Changing accounting software is a bookkeeping job, not a leap of faith. Accountants convert books the same way whichever software you're leaving or joining, and the steps below work for any move: Xero to MYOB, MYOB to Xero, either of them to NeatSum, or a spreadsheet to anything.
The short answer:
- Pick a switch date at the start of a GST period, so each BAS sits in one system.
- Export everything from the old software as at the day before, while you still have full access.
- Bring across balances, not history: a trial balance, the invoices and bills still unpaid, your chart of accounts and your contacts.
- Check it ties out to the cent before you enter anything new.
- Start your bank data from the switch date, so nothing is counted twice.
- Cancel the old subscription last, and keep its records for 5 years.
1. Pick a switch date
The switch date (your accountant may call it the conversion date) is the first day your new software is the book of record. Everything before it stays in the old system. Everything from it onwards goes in the new one.
Make it the 1st of a month, and if you can, the first day of a GST period:
- Quarterly GST: 1 July, 1 October, 1 January or 1 April.
- Monthly GST: the 1st of any month.
- The cleanest of all: 1 July, the start of the financial year, so a whole year's reports come from one system.
Why it matters: if you switch halfway through a quarter, that quarter's BAS figures sit in two places, and you have to add them together by hand. Switch at the start of a period and every BAS comes from one set of books.
Everything you export in the next step is as at the day before the switch date. Switching on 1 January means balances as at 31 December.
Avoid switching in the weeks before a BAS is due. Lodge the last BAS from the old system first, so you're not learning new software against a deadline.
2. Export everything before you cancel
This is the step people regret skipping. Cloud software usually limits or ends your access once the subscription stops, and your records are still your responsibility.
The ATO is direct about it. If your records are in the cloud, it says to make sure "you download a complete copy of any records stored in the cloud before you change software provider and lose access to them." It also says "You need to be able to reconstruct your original data if your record-keeping system changes over time," and that you need to keep most records for 5 years.
Export these, as at the day before your switch date:
| Export | Why you need it |
|---|---|
| Chart of accounts | So the new file uses the same accounts, or you can map old to new |
| Contacts (customers and suppliers) | Names, ABNs, emails and addresses for invoicing and bills |
| Trial balance (accrual basis) | The opening balance of every account |
| Unpaid invoices, with detail | What customers still owe you, invoice by invoice |
| Unpaid bills, with detail | What you still owe suppliers, bill by bill |
| Aged receivables and aged payables | The check figures for the two lists above |
| Profit and loss and balance sheet | For the record, and for your accountant |
| BAS or GST reports for past periods | So you can show how each lodged figure was worked out |
| General ledger detail and attachments | The transaction history the ATO may ask you to explain |
Save the files somewhere you control and back up, not only inside the old software. PDFs are fine for the record. CSV or spreadsheet files are better for anything you'll import.
3. Bring across balances and open items, not years of history
You don't need to rebuild old transactions in the new software. A standard conversion brings across four things:
- The chart of accounts, so balances land in the right place.
- Opening balances from the trial balance, entered as one journal dated the day before the switch date.
- Unpaid invoices and bills, one by one, so you can record each payment against the right invoice when it arrives.
- Contacts, so you can invoice and pay from day one.
Three rules keep it clean:
- The trial balance must balance. Total debits equal total credits. If they don't, fix that in the old system before you export.
- Open invoices must add up to Accounts Receivable. The total of the unpaid invoices you bring across equals the Accounts Receivable balance on the trial balance.
- Open bills must add up to Accounts Payable. Same rule for suppliers.
History stays where it is: in the old system while you have access, and in the files you exported. That's what keeps you able to reconstruct the original data, as the ATO asks.
4. Check it ties out before you start
Before you enter a single new transaction, run a trial balance in the new software as at the day before the switch date and compare it with the old one. Check every line to the cent:
- Every account balance matches the old trial balance.
- Each bank account matches the old balance, and your bank statement for that day.
- Accounts Receivable matches, and the number of open invoices matches.
- Accounts Payable matches, and the number of open bills matches.
- The GST accounts match.
- Retained earnings (or the owner's equity accounts) match.
- The aged receivables and aged payables totals match the old reports.
If one line is out, find it now. A difference you carry forward turns up later as a BAS that doesn't reconcile or a balance sheet your accountant can't sign off.
If you have an accountant or bookkeeper, this is the moment to have them look at it.
5. Start your bank data from the switch date
Your bank balance came across in the opening balances. So the new software only needs bank transactions from the switch date onwards.
- If you connect a live bank feed, start it from the switch date, not earlier.
- If you import bank statements, import from the switch date.
- Don't bring across bank transactions dated before the switch date. They're already inside the opening balance, so they would be counted twice.
If payments were in transit on the switch date (a cheque written but not cleared, a deposit not yet showing), list them. They'll appear in the new software's bank data and you match them as they clear.
6. Cancel the old subscription last
Cancel only when:
- Every export in step 2 is saved and opens.
- The tie-out in step 4 is done.
- Your last BAS from the old system is lodged.
- Your accountant has what they need for the year end.
Before you cancel, read your provider's own terms on what happens to your data afterwards: whether you keep read-only access, for how long, and on which plan. Terms change, so check them on the day, not from memory.
Then keep your exported records for 5 years. The ATO says the period generally starts from when you prepared or obtained the record, or completed the transaction, whichever is later.
Moving to NeatSum
The steps above work for any software. If NeatSum is where you're going, here's what it handles.
From Xero: move from Xero with its export files: your chart of accounts, opening balances, contacts, and unpaid invoices and bills come across, and the balances tie to Xero. NeatSum records the opening balances as one conversion journal dated the day before your conversion date, and locks the days before it so nothing lands in the past by mistake. If an import goes wrong, you can undo it and start again.
From MYOB: NeatSum reads MYOB's accounts list. Opening balances, contacts and unpaid invoices and bills go in through NeatSum's import templates.
Bank data: connect a live bank feed or import bank statements from your switch date (Pro).
The tie-out in step 4 is still worth doing by hand, whichever software you move to.
See how importing works · NeatSum vs Xero · NeatSum vs MYOB · Plans and pricing
FAQ
When is the best time to switch accounting software? At the start of a GST period, and ideally on 1 July. Every BAS then comes from one system.
Do I need to move all my old transactions? No. Bring across opening balances, unpaid invoices and bills, accounts and contacts. Keep the history in the old system and in your exported files.
How long do I need to keep records from my old software? Most records for 5 years, according to the ATO. Download a full copy before you lose access.
Can I switch in the middle of a quarter? You can, but that quarter's BAS figures then come from two systems and you add them together by hand. Starting at the beginning of a period avoids that.
Should my accountant be involved? If you have one, yes. Ask them to check the tie-out and confirm the opening balances before you start entering new transactions.
Sources
All read in full on 15 November 2026.
- Australian Taxation Office, Digital record keeping
- Australian Taxation Office, How long to keep your records
- Australian Taxation Office, Overview of record keeping rules for business
- Australian Taxation Office, Due dates for lodging and paying your BAS
Xero and MYOB are trade marks of their respective owners. NeatSum is not affiliated with or endorsed by Xero or MYOB.
General information only, not tax advice. NeatSum is software, not a registered tax or BAS agent.
Keep your books in NeatSum
NeatSum is Australian cloud accounting software for small businesses: invoicing, bank reconciliation, GST and BAS. It calculates your BAS figures for you to review; you or your agent lodge them.